TENRYU Fishing Rod | GOODS | DURA GLOSS LS SUPREME

No.	Item	Amount
1	DURA GLOSS LS SUPREME (64oz+64oz)1GAL SET	1GAL
2	DURA GLOSS LS SUPREME (16oz+16oz)32oz SET	32oz
3	DURA GLOSS LS SUPREME (4oz+4oz)8oz SET	8oz
4	DURA GLOSS LS SUPREME (2oz+2oz)4oz SET	4oz
5	DURA GLOSS LS SUPREME (1oz+1oz)2oz SET	2oz
6	U-40 BRUSH CLEANER	4oz
7	SYRINGES (FOR MEASUREMENT)	2 pcs
8	ROD BOND (EPOXY RESIN)	4oz
9	ROD BOND (EPOXY RESIN)	8oz

DURA GLOSS LS SUPREME 　（1GAL/32oz/8oz/4oz/2oz）Use: Rod Wrap Finish (coating wrapped thread) Stir the same amount of resin and hardener for 2 minutes, and leave the mixed liquid for 1 or 2 minutes, then use the mixed liquid in approx. 30 minutes after the mixture. Time for LS Supreme to cure depends on temperature, but generally, it cures tack free in approx. 4 hours, it cures enough to use the rod in approx. 24 hours, then it completely cures in 5 days. When re-apply LS Supreme, it would be the best to do within 48 hours after 1st layer of LS Supreme cures. However, when re-applying after 48 hours pass, please do it after scratching surface with something like aluminum foam.	BRUSH CLEANERUse: Wiping out LS Supreme from the used brush Wiping should be done before LS Supreme turns into a gel.
	SYRINGESUse: Measuring LS Supreme Use separate syringe for measuring resin and hardener, to avoid blending them in the syringe
	ROD BONDUse: Gluing grip, reel seat, ferrules and other parts Stir the same amount of resin and hardener for 2 minutes, and use the mixture in approx. 45 minutes. Rod Bonds cures enough to use the rod in approx. 24 hours
Cautionary Notes It is the best to mix resin and hardener in dust-free room, 20-24 degrees C in temperature. When temperature changes by 7-8 degrees, curing time changes in nearly double. When mixing under the temperature of below 21 degrees, please use LS SUPREME after warming epoxy resin bottle with lukewarm water for approx.10 minutes. Do not warm hardener. Mix resin and hardener at least 3cc for each, and wipe off the mixed liquid with brush cleaner.