FISHING GEAR
DURA GLOSS LS SUPREME
Lineup
| No. | Item | Amount |
|---|---|---|
| 1 | DURA GLOSS LS SUPREME (64oz+64oz)1GAL SET |
1GAL |
| 2 | DURA GLOSS LS SUPREME (16oz+16oz)32oz SET |
32oz |
| 3 | DURA GLOSS LS SUPREME (4oz+4oz)8oz SET |
8oz |
| 4 | DURA GLOSS LS SUPREME (1oz+1oz)2oz SET |
2oz |
| 5 | BRUSH CLENER | 4oz |
| 6 | SYRINGES (FOR MEASUREMENT) | 2pcs. |
-
DURA GLOSS LS SUPREME (1GAL/32oz/8oz/2oz)
Use: Rod Wrap Finish (coating wrapped thread)
- Stir the same amount of resin and hardener for 2 minutes, and leave the mixed liquid for 1 or 2 minutes, then use the mixed liquid in approx. 30 minutes after the mixture.
- Time for LS Supreme to cure depends on temperature, but generally, it cures tack free in approx. 4 hours, it cures enough to use the rod in approx. 24 hours, then it completely cures in 5 days.
- When re-apply LS Supreme, it would be the best to do within 48 hours after 1st layer of LS Supreme cures. However, when re-applying after 48 hours pass, please do it after scratching surface with something like aluminum foam.
-
BRUSH CLEANER
Use: Wiping out LS Supreme from the used brush
- Wiping should be done before LS Supreme turns into a gel.
-
SYRINGES
Use: Measuring LS Supreme
- Use separate syringe for measuring resin and hardener, to avoid blending them in the syringe
Cautionary Notes
- It is the best to mix resin and hardener in dust-free room, 20-24 degrees C in temperature. When temperature changes by 7-8 degrees, curing time changes in nearly double. When mixing under the temperature of below 21 degrees, please use LS SUPREME after warming epoxy resin bottle with lukewarm water for approx.10 minutes.
- Do not warm hardener.
- Mix resin and hardener at least 3cc for each, and wipe off the mixed liquid with brush cleaner.